Jump to content

All Activity

This stream auto-updates     

  1. Today
  2. I've had an issue the last few weeks where if I boot it the car craps itself and either goes down to 5 cylinders or limp home mode - I could work it out as I stopped the engine quickly after. On restart all was good again. At first the EML came on with this but there were annoyingly no codes. Then P0303 started to come up and the problem came even when I was not booting it but the engine was cold. It always re-started fine with no light and the problem disappeared. So this code relates to a misfire on cylinder 3. Given that it was not happening all the time it made sense to me that it would be the coil pack breaking down on that cylinder. £23 later from Eurocarparts I have a Bosch replacement and hey presto, problem solved. Bosch are the OE manufacturer and the old originals have Bosch on them but with the BMW part number as well. I still need to get the front wishbones replaced as I can feel there is play in the bushes at the rear but I don't just want to replace the bushes, I'd rather do the wishbones and bushes to know I'm back at square one with all good stuff. I'm hoping to stockpile the parts soon and do it next month. I think I'll use poly bushes on new arms. Kirkynut
  3. This has sold on eBay to a chap who drifts old E46's with his son. He says he'll use the engine and gearbox out of it, so the shell will eventually be scrapped but never mind. Kirkynut
  4. What is the difference in a 188mm and 188k diff for the E46 ? Can the crown and pinion be swapped between these ? Reason for asking, im racing an E46 and need to change the gearing to suit the track and engine ! Thanks Mo
  5. I have a 2006 bmw 330i and it’s been sitting in my garage. It drove pleasant for a bit but it had a clicking sound when it drove and one time there was once some smoke from underneath the hood and a burning smell. I then let the car take a seat for a couple days and I’m now not certain how the automobile is on gasoline or oil because I’m new to motors and simply received it so if all and sundry may want to help that would be extensively appreciated. Now when I insert the key fob and press the start button it try’s to begin but without delay turns off. No lights flash besides the headlights and the key light on dash. https://curiouspin.com/ It occurs warm or cold. The vehicle will simply not crank. I have put a clean starter and solenoid but nevertheless does it once in a while. I cant discern it out, the excellent aspect is that I can soar start it, by using both pushing the automobile or jumper cables. Or I can also wait and all at once it just works. Check the battery connections and tighten them with a spanner if necessary. Remove any corrosion with a wire brush; a bad earth connection can result in inadequate voltage at the spark plugs, therefore a weaker spark and slow starting. https://curiouspin.com/dj-khaled-net-worth/ Also, appear for leaks around the fuel injectors and get a professional to check the fuel stress and fuel pump — a problem with either ought to imply gasoline is now not being injected into the cylinders properly. If none of that helps, the fault should be electrical, requiring a full diagnostic check at your dealership or a BMW specialist. BMW may not start! Nothing occurs when you press the START button or turn the key? https://www.pinterest.com/pin/794392821752600452/ Symptoms of BMW no begin problems fluctuate and vary from yellow exclamation mark on the dashboard to clicking when you press start or you may also even hear countless clicks. In many cases, BMW will not begin when it is cold, lights and radio work but the engine nonetheless would not start. BMW might also no longer begin even with a leap start. In this guide, we are going to look at some of the most frequent issues that can stop a BMW from starting and viable methods that you can troubleshoot or fix these problems yourself. https://en.wikipedia.org/wiki/Adam_Sandler Symptoms BMW no beginning signs and symptoms can vary. Here are some of the most common signs you may additionally ride if your BMW might not start. Pushing START will no longer start the engine Adam Sandler Net Worth BMW won't begin all lights are useless / off You insert the key and nothing happens BMW engine may not flip over, makes a clicking noise Car may not start after altering the battery BMW may not start suggests an exclamation mark BMW might not begin in cold weather EML Light On, BMW refuses to start BMW lights flashing, no start BMW won't start suggests key symbol on the dashboard
  6. Yesterday
  7. Yup! A little scabby, could do with a refurb: https://www.facebook.com/marketplace/item/855021038023911/
  8. 1. No, the diameter will be very similar. 2. Yes, no problems at all. 3. Longer bolts won’t be needed unless you’re fitting spacers as well. 4. Should be all good 👍
  9. Hi, I have a 318 convertible with the standard 16" style 45 alloys with 205/55/16 tyres. I am wanting to fit the MV2 18" staggered wheels with 225/40/18 on front and 255/35/18 on rear. A couple of questions 1, will this affect the speedo reading by any discrepancy, if so by how much 2, will they fit straight on without any problems 3, I have heard that they may need longer wheel bolt, is this correct 4, Any other issues I may encounter Advice greatly appreciated
  10. Last week
  11. tpms will work on mk60.c12. replaced mine today, which was a c02 for a newer one c12 and is working on c12. at least I've coded it and all worked well, and the options on inpa are not greyed out.
  12. hi, im elio from portugal and i got an e46 320d from 2003. my car is an oem beauty and in mint condition. just love it
  13. Howd ya get on? Did this fix it?
  14. Ok This is doing my head in...... Been Getting 3 Fault Codes 227/228 and 65 (Fuel trim bank 1 Trim Bank 2 and Inlet Camshaft sensor. Previously had Exhaust Sensor too. So replaced Parts below:- Exhaust Cam Sensor (HAAS Brand) - Message Cleared Inlet Cam sensor twice now (Delphi and HAAS) - Code still intermittent present Replaced Fuel Pump and Filter Replaced All spark plugs (NGK-R) I'm still getting a laggy acceleration , but oddly if i turn ignition off then restart again whilst driving/Coasting the Lag goes and car behaves normally until next start! Also im noting it takes longer cranks to start the car before it fires up! Anyone else had this and fixed it!! My next things to replace are:- Inlet Vanos Solenoid (As i rounded nut removing for Intake cam sensor) Maf Sensor Genuine VDO Item New CCV Valve to fit
  15. Got some more pics from rear angle devil 666 please
  16. Got some more pics from another angle bud looks lush
  17. very beautiful car ..my uncle already have this car..amazing functionality ..great.
  18. Good to know: in BMW which year in Cas 4 or FEM? and which BMW key programmer works? Part 1: Cas 4 or FEM car year Pls look at the chart after 2014 all are fem 1-3 Fxx series FEM , x5-x6 Fxx BDC 5-6-7 series Fxx, x3-x4 Fxx CAS 4 and so on. Part 2: Cas 4 or FEM key programming Here are auto key programmers confirmed to work for Cas 4 and FEM:
  19. I will be happy to help you, I always help students. You can read free essays about fahrenheit 451 at https://samples.edusson.com/fahrenheit-451/ , this is a great free essay, I think you should read it, also you will find there are many other free essays that you will find interesting, I was happy to help.
  20. At the risk of repeating an age old topic, I can't decide whether to replace the m-sport shocks on my clubsport with Bilstein B4 or B6 units. Any first hand impressions of either would be really useful. I did read as much as I could on the topic but still can't decide. I understand the B4 is pretty much an OE replacement and that the B6 is a definite upgrade. Either will, or course, feel much better than the currently well worn out suspension. I will be replacing all the associated parts, not just the shocks. So, will the B4 be good enough? Will the B6 ruin the ride? I'm not after a trackday car, but like a good handling car. Cheers all!
  21. donfloyd

    2013 BMW X5

    Rear tailgates have been known to creak and might require a new latch to stop this. The rear-view camera (where fitted) can stop working and could also require a new unit to solve the problem
  22. I know all about windows being done
  23. yes .. x3 work very fine. my aunt use this car working perfectly.
  24. The enemy of all diesel engines is carbon deposits. The EGR valve which recirculates dirt through the engine to reduce emissions makes this worse. The first step for any poorly running diesel is to strip down the entire intake tract and clean it, especially the EGR valve. Many folk blank off the EGR valve but this may not be legal where you live. These engines have an internal breather filter, sort of like a second air filter according to the essay writing blog. If the main air filter is dirty then it's time to change both. If you buy a used car just assume the breather filter needs changing and the EGR needs cleaning. From 2004 some got a vortex filter instead. Diesels take longer to warm up than a petrol engine and if run cold will get dirty very quickly as they don't burn off soot deposits. For this reason you really want to avoid cars that have been used only for lots of short journeys. They will seldom have reached normal operating temperature and will be filthy inside.
  25. same here good experienced from them.
  1. Load more activity
×
×
  • Create New...