Jump to content
Jorge-

Black And Yellow...

Recommended Posts

I was wondering if it was that actually, gona give it a go tomorrow with and without the back and see what happens.

Share this post


Link to post
Share on other sites

i know what you've done, but then i saw on facestalk so that's cheating!

saw the stanceworks writeup whilst waiting for the missus in a petrol station the other day so i didn't have time to read the writeup, just looked at the pictures :lol:

Share this post


Link to post
Share on other sites

Time to get the angle grinder on those arches then. Tyres fit perfectly, body work is in the way lol

Share this post


Link to post
Share on other sites

Looking good ;) Love the look, as its not the norm. Still think you should de-badge and lose the spoiler though. Plus get a new fooking wing :lol:

And you could of put more of a stretch on :rolleyes::lol:

Share this post


Link to post
Share on other sites

Took the cover off camera on Desire, look at the difference!!

IMAG0030.jpg?t=1299951555

Full shoot later

Share this post


Link to post
Share on other sites

I knew there would be a noticeable difference, but that is amazing. How long til the camera lens is ruined now

Share this post


Link to post
Share on other sites

I knew there would be a noticeable difference, but that is amazing. How long til the camera lens is ruined now

Keep the phone in a soft case when not in use & it should be cool :D

Share this post


Link to post
Share on other sites

I was taking the back of to take pics but got bored of doing it so just took the plastic lens out. Been like that for over 3 months and the camera lens is hunky Dorey :)

Edited by Clubsport-Chris

Share this post


Link to post
Share on other sites

Yes, theres a new thread but they had to come off already til I can figure out how to make them work.

Share this post


Link to post
Share on other sites

Yes, theres a new thread but they had to come off already til I can figure out how to make them work.

Im soon going to refurb my 18s thinking of flaring the rear arches and addiing a 20mm spacer.

What size spacers did you have?

Thanks Naz

Share this post


Link to post
Share on other sites

They were 15mm, so ET4 in the end.

Not a chance they are going on with a 205 tyre though without some more arch mods.

Flaring always looks horrible to me, so I'd rather go for a 12mm spacer and run slightly less agressive offsets.

Share this post


Link to post
Share on other sites

Lol, yeah.... although there was still like 10mm of arch there because the guy refused to do them flat.

I've taken a sanding wheel and pliers to one though and its probs like 3-4mm thick, need to get the tool to change tools on the angle grinder and flap wheel the lot away.

New pictures are here though, http://www.e46zone.com/forum/index.php?showtopic=25539

Share this post


Link to post
Share on other sites

My local arch enemy guy, cost a few quid, email them for a quote.

To be honest, being where you are with lots of local guys, has nobody on AB25 got a roller? It really doesn't look too difficult. Couple of guys your way with E46s on SW have done their own.

Wire wheel on angle grinder - remove all the seam sealer

Warm up paint with heat gun

Start rolling arches, little at a time, applying heat when needed (if you know someone with a roller they should know the rough technique, pretty much just brute force)

Arch enemy refilled my rolled arches with some more seam sealer then gave the whole lot a coat of black paint to fully seal

Share this post


Link to post
Share on other sites

The black lips are growing on me. I really disliked them when i first saw them, but from that last picture (looks more natural, not in car park) they look pretty sweet!

Just thought i'd share :P

Look forward to seeing it when you manage to get the spacers on :)

Share this post


Link to post
Share on other sites

My local arch enemy guy, cost a few quid, email them for a quote.

To be honest, being where you are with lots of local guys, has nobody on AB25 got a roller? It really doesn't look too difficult. Couple of guys your way with E46s on SW have done their own.

Wire wheel on angle grinder - remove all the seam sealer

Warm up paint with heat gun

Start rolling arches, little at a time, applying heat when needed (if you know someone with a roller they should know the rough technique, pretty much just brute force)

Arch enemy refilled my rolled arches with some more seam sealer then gave the whole lot a coat of black paint to fully seal

Im guessing someone on there has, but its weather a trust them/myself tbh

SW?

Hmm i may just email arch enemy, least its a porper job then.

Share this post


Link to post
Share on other sites

Josh - PM Haydon witht the sick silver 46 touring on 10j et-5 OZ Mitos - he has a roller and did his own with great success mate.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...

×
×
  • Create New...