Jump to content
Mr Squibbs

Bmw | 3 Series Coupe | E46 | M Sport

Recommended Posts

Well after months of looking and shall I, sharn't I - I finally took the plunge and bought what had been a dream since school. Albeit not an M3 that I had longed for, aesthetically, these cars are stunning in my opinion and will be considered a classic in years to come.

I opted for the 318i - we're looking to buy a house next year, so I wanted something that I could keep (now I'd got my hands on one) and having had it for 5 days now, the power is more than enough for me at the moment, and I'm pleasantly surprised with the economy.

Picked her up Tuesday night, and got some M Sport mats ordered straight away, and won a cup holder on ebay - I can recommend the mats for £23 delivered (linky) see pic below

Saturday came and I got out all the gear that had sat redundant since I owned my 1 Series.....and the car got 3.5 hour wash including snow foam and Meguiers stage 1 paint cleaner, and stage 2 deep crystal polish.

Got the opportunity earlier today to pop for some quick photos....

Spec

BMW 3 Series e46 318Ci 2005

Sapphire Black

63k

Full BMW History

Alcantara Sports Seats

Cup Holder

M Sport mats

IMG_0909-Edit-900x600.jpg

IMG_0908-Edit-900x600.jpg

IMG_0910-900x600.jpg

IMG_0914-Edit-2-900x600.jpg

Phone pic of the M Sport mats £23.50 delivered from ebay

DSC_0290_zps918513ca.jpg

Edited by Mr Squibbs
Link to comment
Share on other sites

Welcome to the Zone.

Lovely looking coupe :D

Thanks mate, read through your thread a few times before purchasing, it's lovely

Very clean! Don't see the point in debadging when you still have a single exhaust tip though :P

Just for the record, I didn't debadge it, it came like that......but I wud have debadged it anyway. Like B0B says it looks cleaner...those that know what they're look for wouldn't be fooled anyway.

Not everyone debadges so they can pretend they have a bigger car though.

Some people just do cos they think it looks a lot cleaner (like me)

Spot on mate

Smart

Thanks mate, congrats on the feature : )

Link to comment
Share on other sites

Thanks mate, Canon all the way for me...yourself?

Good man! Canon too, I'm wanting to get some new photos of the car but it needs a thorough clean and a nice background. Going to wait until the weather warms up a little.

Link to comment
Share on other sites

Good man! Canon too, I'm wanting to get some new photos of the car but it needs a thorough clean and a nice background. Going to wait until the weather warms up a little.

Same here mate, mines absolutely rotten at the moment, hoping it stays dry tomorrow so I can give it a much needed clean :thumbup:

Link to comment
Share on other sites

Dial mod done

Before

DSC_0330.jpg

DSC_0332.jpg

DSC_0334.jpg

DSC_0336.jpg

89a8eae435aaaa3edda5883fb9df9ed5.jpg

Done

DSC_0337.jpg

Anyone that's done it, did you have difficulty putting the left and right trip buttons back in? My left button (trip reset) isn't working :s

Btw, I know the red on the needles hasn't taken very well. That is after 3 coats. I'll get it all out again at the weekend and re-do it

Edited by Mr Squibbs
Link to comment
Share on other sites

One of the most important parts of putting the cluster back together is to make sure you align the trip reset and clock adjust buttons correctly, if they are not aligned up right then you will snap the small "L" shaped striker pins off.

Its worth taking it apart again and having a look, but I would suggest you have broken the left button

Link to comment
Share on other sites

One of the most important parts of putting the cluster back together is to make sure you align the trip reset and clock adjust buttons correctly, if they are not aligned up right then you will snap the small "L" shaped striker pins off.

Its worth taking it apart again and having a look, but I would suggest you have broken the left button

I don't think I have broken the little "L" bit, as it was intact before I put the clocks back in the car. We spent ages in the house trying to work out to line it up properly and I wasn't fully happy in the house but had to go out so they had to in quickly. I'll take them out again tmw, you know which way round they should go do you?

Thanks mate, much appriciated :)/>

Clocks look good, such an easy yet affective mod. The pins were a bit fiddly to put back in the correct position but managed ok :D/>

Yea what a difference it makes for £13 :) if B0B can't help, do you remember what way round the little plastic pins go? My right hand side one works, but the left wont click in to reset the trip

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...