TriggerFish Posted June 26, 2017 Report Share Posted June 26, 2017 17 hours ago, Foe said: Wow!!! What a difference a weight makes! No no - I thought the wheel shake was due to a weight. The deformation is what caused the shake (which was poor maintenance on my part). I wish I could blame it on a weight though! Foe 1 Quote Link to comment Share on other sites More sharing options...
BavarianDiesel Posted July 2, 2017 Report Share Posted July 2, 2017 Fixed a stalling 320D with a £14 fuel Relay. And attempted to fit LED number plate lights from ebay on to find out they don't work. TriggerFish and Foe 2 Quote Link to comment Share on other sites More sharing options...
lozevans Posted July 11, 2017 Report Share Posted July 11, 2017 Had new crank sensor fitted (kept cutting out) & i can confirm that a VDO sensor is OE with BMW scratched off. I paid £45 off Ebay for sensor & £10 for fitting, bargain!! Sent from my iPhone using Tapatalk Quote Link to comment Share on other sites More sharing options...
Foe Posted July 16, 2017 Report Share Posted July 16, 2017 So after lots of searches on lots of sites and still no answers..... My rear 3rd break light, on the tourer, was not working. Tried everything wiggling wires, meter testing, ripped out the rear in search of something. And then the answer. The actual light itself has two small wires and the clip that held them rubbed one, water got in and rotted the wires. See below So I soldered the wires together, tapped up, and now have a working 3rd light! But the dash light, for blown rear bulb, is still on. My next thing to try and fix! I reckon it might be something with when the tow bar was fitted by the PO. Quote Link to comment Share on other sites More sharing options...
Markus5000 Posted July 19, 2017 Report Share Posted July 19, 2017 Today, I have mostly been setting about the stubborn to remove egr valve on my 330d. I've blanked off the vacuum pipes and the cars been mapped to delete the egr dash warning. Egr delete next month but a clean for now Foe and RMJ 2 Quote Link to comment Share on other sites More sharing options...
Markus5000 Posted July 19, 2017 Report Share Posted July 19, 2017 (edited) Drrrrty Edited July 19, 2017 by Markus5000 Change Quote Link to comment Share on other sites More sharing options...
AD093 Posted July 19, 2017 Report Share Posted July 19, 2017 Sunday i had my intake manifold out to remove the swirl flaps, yesterday i had it out again to refit the seals that fell out when i refitted it the first time, today i have been mostly enjoying it, before this sunday when im doing the prop shaft joints... Quote Link to comment Share on other sites More sharing options...
Markus5000 Posted July 20, 2017 Report Share Posted July 20, 2017 Failed at removing front wheel abs sensor thingy. Got the magic 3 lights so thought I'd take it off and give it a clean. Seems that a previous owner had rounded out the middle of the Alan bolt :/ epic fail at removal..... Quote Link to comment Share on other sites More sharing options...
jayh Posted July 20, 2017 Report Share Posted July 20, 2017 Had this a few times ,use a t40 3/8 socket and with a bit of a tap with a hammer ...and she will come out !, Markus5000 1 Quote Link to comment Share on other sites More sharing options...
Markus5000 Posted July 20, 2017 Report Share Posted July 20, 2017 39 minutes ago, jayh said: Had this a few times ,use a t40 3/8 socket and with a bit of a tap with a hammer ...and she will come out !, Thanks man Quote Link to comment Share on other sites More sharing options...
MICK 330 Posted August 8, 2017 Report Share Posted August 8, 2017 After 4 years watching rust eat the wings I finally got it sorted. Obviously not a great match but good enough for a car with 231,000 miles on it! I can live with it lol. Once off the old wings had the breaking strain of a KitKat! Cant load the new photo so have to do another post. Also got the re call done for drivers airbag on both cars. As usual the stealers gleefully told me of about 5 bloomin jobs that need doing on the old gals. Oil leaks & front bottom arm ball joints need attention. Bugga! Quote Link to comment Share on other sites More sharing options...
MICK 330 Posted August 8, 2017 Report Share Posted August 8, 2017 As you can see they were a mess! £150 mates rates . Wish id done them earlier! mjn 1 Quote Link to comment Share on other sites More sharing options...
MICK 330 Posted August 8, 2017 Report Share Posted August 8, 2017 Don't look tooo close but its near enough. Markus5000 and mjn 2 Quote Link to comment Share on other sites More sharing options...
MICK 330 Posted August 10, 2017 Report Share Posted August 10, 2017 Yet more expense lol 2 new bottom arms as brake judder re appeared yesterday during a 200 mile round trip. Stealers said there was some play in them after checking the car over while in for the airbag recall. As usual I thought there taking the pee but 100 mile later lol. Also gotta get some powerflex bushes for the rear trailing arms. That's the next job....well, until she throws summat else my way! Quote Link to comment Share on other sites More sharing options...
Markus5000 Posted August 10, 2017 Report Share Posted August 10, 2017 Met with triggerfish for some inpa action and a drive of his and he of mine Typical, the error lights that have religiously come on since I got the car wouldn't come on today MICK 330 and TriggerFish 2 Quote Link to comment Share on other sites More sharing options...
dunk1 Posted August 11, 2017 Report Share Posted August 11, 2017 (edited) Got the local car wash guys to give my vert a clean then put it on Piston Heads. https://www.pistonheads.com/classifieds/used-cars/bmw/e46-3-series-98-06/bmw-3-series-e46-330ci-msport---------------2004/7580782 Looking at either an M3 4.0 DCT vert or Z4 35isDCT vert as its replacement Edited August 11, 2017 by dunk1 Quote Link to comment Share on other sites More sharing options...
mjn Posted August 13, 2017 Report Share Posted August 13, 2017 (edited) Drove it to Gaydon. Fairly busy day. Some tasty cars there. Edited August 13, 2017 by mjn Quote Link to comment Share on other sites More sharing options...
TriggerFish Posted August 13, 2017 Report Share Posted August 13, 2017 (edited) Refitted my HSDs from my last 330 to the rear. I no longer scrape getting out of the work car park! (Although I suspect it will do once the fronts are on, as I think they're set lower than the apex's that are on atm.) Today I hovered the inside as it had got disgusting. Dust and bits of plant everywhere. The downside of parking with the roof open I guess! Edited August 13, 2017 by TriggerFish Quote Link to comment Share on other sites More sharing options...
Wrighty74 Posted August 15, 2017 Report Share Posted August 15, 2017 Tourer failed the mot last week Offside front calliper(old age) Offside front tyre had split in it Not too bad So had 2x Avons ZV5 fitted to match the recent rears I had put on New calliper and brake pads fitted Plus a Hunter alignment 12 months new ticket and drives really nice again Also had a nice comment about the car from the mechanic👌🏻 Quote Link to comment Share on other sites More sharing options...
MICK 330 Posted August 17, 2017 Report Share Posted August 17, 2017 Vert in for Oil & brake fluid change plus find out whats rattling at the front. Got a feeling its the front disc covers? Other than that she`s behaving lol. Quote Link to comment Share on other sites More sharing options...
TriggerFish Posted August 17, 2017 Report Share Posted August 17, 2017 Fixed my front end knocking (drop links), refitted the HSDs to the front (I'd forgotten how comical they are on their stiffest mode!), gave it an oil change, and discovered during all this that the xenon level sensor was broken, so fixed that, and that the front brake hoses were perished, so replaced those too. I think it's needs to be lower at the front though, despite the fact I was happy with that ride height on them on my last E46... Quote Link to comment Share on other sites More sharing options...
Foxsake Posted August 22, 2017 Report Share Posted August 22, 2017 From this.To this.Sent from my iPhone using Tapatalk ibrahimx2001, Markxr and Ruesta 3 Quote Link to comment Share on other sites More sharing options...
mjn Posted August 24, 2017 Report Share Posted August 24, 2017 Holiday mode....... Quote Link to comment Share on other sites More sharing options...
Ruesta Posted August 25, 2017 Report Share Posted August 25, 2017 On 24/08/2017 at 07:54, mjn said: Holiday mode....... Haha, looks great. Think I saw your car in the car park at Gaydon??. Was a great day. mjn 1 Quote Link to comment Share on other sites More sharing options...
mjn Posted August 25, 2017 Report Share Posted August 25, 2017 Yup. I was there, directly in front of Remus exhausts. Ruesta 1 Quote Link to comment Share on other sites More sharing options...