Jump to content
Steviejay

Members Wheels..........

Recommended Posts

The Year Of The Car - 2001

Model Of The Car - 320i SE (M Sport Suspension)

Offset's Front and Rear - Fronts: ET35 Rears: ET45
Rim width - Fronts: 7.5J Rears: 8.5J
Profile - Fronts: 225/45/17 Rears: 245/40/17
Archwork required (rolled or pulled) - None
Size Of The Alloy - 17"
Model Of Alloy - BMW Style 68

media%20(6).jpg

Edited by Max M4X WW
Link to comment
Share on other sites

The Year Of The Car 2003 (53)
Model Of The Car 318ci
Offset's Front and Rear R-ET35 F-ET20 (After 15mm spacers at the front)
Rim width R-10J F-8.5J
Profile R- 225/40/18 F- 205/35/18
Archwork required (rolled or pulled) None
Size Of The Alloy 18"
Model Of Alloy /Replica or Original. Original Keskin KT-1 - iirc Replica of OZ Futura's

TZT8e2B.jpg

oDEbWF1.jpg

qKXwhAd.jpg

z8k3Nli.jpg

Link to comment
Share on other sites

Year of car 2003

Model 330d

Suspension factory SE

Arch work none

Winter set-up.........

Make of wheel genuine BMW Style 44

Size 17x8 et47 on 13mm front, 15mm rear hubcentric spacers

Tyres 225/45x17

The look is about the same as the Style 157s in post 172, above. I don't have any images, but if anyone wants I can get some.

Link to comment
Share on other sites

I just upgraded my wheels and tyres

Year of car 2oo2

Model 330ci m sport

Offset Fr 38 Rear 45

Rim Width Fr 8.5 Rear 9.5

Profile 215x35x19 245x30x19

Archwork None

Size 19"

Originals 18" MV1

post-32120-0-20947300-1421688733_thumb.j

post-32120-0-05251100-1421688921_thumb.j

post-32120-0-76141200-1421688938_thumb.j

post-32120-0-54639200-1421688956_thumb.j

Link to comment
Share on other sites

Bbs rs gt reps.

19 inch staggered.

fronts 8.5j -et35

Rears 9.5j et35.

Coilovers fitted. Running at the moment 15 mm spacers to bring them too m3 fitment.

Might go for 13 mm or 10 mm on the front and 18 mm on the rear.

So et 22-25 on fronts and et 17 on rears.

post-16255-142262833625_thumb.jpg

Link to comment
Share on other sites

The Year Of The Car - 2002

Model Of The Car - M3

Offset's Front and Rear - Front 33mm with 10mm spacer. Rear 14.5mm with 7mm spacer.

Rim Width - 8.5J front & 9.5J rear

Profile - 225/40 front & 255/35 rear

Archwork required (rolled or pulled) - Not required depending if you lower.

Size Of The Alloy - 19"

Model Of Alloy /Replica or Original - Genuine AC Schnitzer Type 3 non racing.

11295272466_5db01b8075_c.jpg336 by djsyxx6, on Flickr

11295229135_6804966af6_c.jpg338 by djsyxx6, on Flickr

With design elements/spoke fillers:

16493862031_0dc28f73e6_c.jpgIMG_8345 by djsyxx6, on Flickr

16547762162_14a0381435_c.jpgIMG_8466 by djsyxx6, on Flickr

Link to comment
Share on other sites

This is how mine will look like. [emoji41] .

Still have to check the spigot rings.

Where did you get the fillers from.

Edited by Daz 330 Cs
Link to comment
Share on other sites

Still have to check the spigot rings.

Where did you get the fillers from.

AC Schnitzer UK, not many sets left though for the 19's...
Checked the website. Can't find them. Do I have to ask them.
Link to comment
Share on other sites

You can contact Lorcan Parnell via lorcan@ac-schnitzer.co.uk. I couldn't find some spacers and spigot rings on their website, so after contacting them through form he got back to me. After that I contacted him several times and got responses very quickly...btw I was very surprised that they don't have touch up paint or colour code for their alloys)

Link to comment
Share on other sites

The Year Of The Car - 2003

Model Of The Car - 330ci
Offset's Front and Rear - Front 43mm with 7mm spacer. Rear 43mm with 10mm spacer( also have 20mm but they were rubbing slightly).
Rim Width - 8.5J front and rear
Profile - 235/35 all 4 corners
Archwork required (rolled or pulled) - Not required, but for running 20mm on rears rolling might be a good option.
Size Of The Alloy - 19"
Model Of Alloy /Replica or Original - Genuine AC Schnitzer Type 4.

post-31479-0-15319600-1420400745_thumb.j
Link to comment
Share on other sites

The Year Of The Car - 2004

Model Of The Car - 330ci
Offset's Front and Rear - Front 47et with 15mm spacer. Rear 50et with 15mm spacer
Rim Width - 8.0J front and 8.5J rear
Profile - Front- 205/35/18 Rear- 225/35/18
Archwork required (rolled or pulled) - Not yet.
Size Of The Alloy - 18"
Model Of Alloy /Replica or Original - Genuine MV2 bmw wheels

post-32281-0-35797800-1425307932_thumb.j

post-32281-0-46998200-1425308014_thumb.j

post-32281-0-53757500-1425308039_thumb.j

Link to comment
Share on other sites

The Year Of The Car - 2002

Model Of The Car - M3

Offset's Front and Rear - Front 33mm with 10mm spacer. Rear 14.5mm with 7mm spacer.

Rim Width - 8.5J front & 9.5J rear

Profile - 225/40 front & 255/35 rear

Archwork required (rolled or pulled) - Not required depending if you lower.

Size Of The Alloy - 19"

Model Of Alloy /Replica or Original - Genuine AC Schnitzer Type 3 non racing.

y djsyxx6, on Flickr

16547762162_14a0381435_c.jpgIMG_8466 by

Hey, where do I get the fog lamp "covers" or what it is? Looks dope! :2guns:

Link to comment
Share on other sites

New wheels installed yesterday

Oz futuras

Specs: 5 X 120 and 5 X 112 PCD.

10" rear ET15.

9" fronts ET 25

a4c3d0b117648e8471a67f2aa5808b80.jpg

Awesome, if you weren't so far away would have loved to do a photoshoot with mine on the Mitos. lol

Hey, where do I get the fog lamp "covers" or what it is? Looks dope! :2guns:

Thanks dude, they can be purchased from ebay or SSDD motorsport do them.

Link to comment
Share on other sites

New wheels installed yesterday

Oz futuras

Specs: 5 X 120 and 5 X 112 PCD.

10" rear ET15.

9" fronts ET 25

a4c3d0b117648e8471a67f2aa5808b80.jpg

Awesome, if you weren't so far away would have loved to do a photoshoot with mine on the Mitos. lol

Hey, where do I get the fog lamp "covers" or what it is? Looks dope! :2guns:

Thanks dude, they can be purchased from ebay or SSDD motorsport do them.

Cheers mate, I'll send you a pm if I'm ever down that way and we can get a couple photos if you want. It's in for paint beginning of April so after then would be cool. Never been to ace cafe so could meet there :)

Link to comment
Share on other sites

The Year Of The Car 1999

Model Of The Car 328 saloon

Offset's Front and Rear orig offset is 57 I believe with 30&35mm custom spacers for using the larger nuts

Rim width 8" front and rear

Profile 215/35/18

Archwork required (rolled or pulled) neither

Size Of The Alloy 18"

Land Rover mondials in anthracite

Budget coilovers wound most of the way down

6eac12920c506c3096c3fd4279af8066.jpg

60ae8d3da4d90e3840dd03989edc6f79.jpg

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

The Year Of The Car 1999 T reg
Model Of The Car 328i SE
Offset's Front and Rear et 35
Rim width 8J + 9J
Profile 225/40 F 255/35 R
Archwork required (rolled or pulled) rolled
Size Of The Alloy 18
Model Of Alloy /Replica or Original. Original AVA Miami
post-34168-0-30135400-1427301942_thumb.j
post-34168-0-47155200-1427301935_thumb.j

post-34168-0-05652100-1430669748_thumb.j

newbola_zpsk6ukbxnh.thumb.JPG.470dde2eff

New Alloys,Brembo Discs and EBC pads, Braided lines, Bushes replaced, New Koni shocks + H&R Springs.

 

rear tyre.jpg

Edited by Snakle
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...