incredirog Posted December 17, 2020 Report Share Posted December 17, 2020 Got a broke tilt motor on my manual fold mirrors so need to replace it. Bit bored of the AC Schnitzer mirrors I have and don’t want to paint them again, and I have a pair of 12 pin powerfold memory mirrors. Unfortunately I’ve lost both the modules, the switch and the looms, I put together the whole retrofit kit and then decided on the ACS. Anyway, has anyone got any experience of after market fold modules? Temptingly cheap and seemingly easier to wire in. My main concern is being able to make the little button on the switch operate them the rest is taken care of by a 12v signal when you lock or unlock the car. The ‘innoparts SAM 1.0’ popular around 10 years ago is seemingly discontinued and impossible to find second hand so all that is on the market are these £10 chinese things. Ta Quote Link to comment Share on other sites More sharing options...
Schumacher Posted December 22, 2020 Report Share Posted December 22, 2020 No experience with aftermarket modules but I'm sure you can find OE ones on the Bay of E or contact Quarry Motors (BMW breaker). Quote Link to comment Share on other sites More sharing options...
incredirog Posted December 22, 2020 Author Report Share Posted December 22, 2020 no worries I’ll figure it out, money is tight and I haven’t totally given up on finding the rest of the kit, too tight to buy it all over again 🤣 Quote Link to comment Share on other sites More sharing options...
Schumacher Posted December 23, 2020 Report Share Posted December 23, 2020 The Chinese ones for £10 might be worth a punt? Not much to lose. Quote Link to comment Share on other sites More sharing options...