Jump to content
X-Man

X-Man's Midnight Loon - Style 131s Fitted

Recommended Posts

With one of my MV1s buckled and another leaking air, I was on the lookout for some new wheels. I looked for MV1s & 2s but then stumbled upon these.....

20140721_203453_zpshewsaizr.jpg

Genuine set of 131s with new tyres!

20140721_203500_zpsv4c9xake.jpg

At the moment they are set up as square with 245/45/18 all round so don't know whether to stick with those (they might rub?) or go OEM (225/255) staggered?

The 245s will be 2.5% smaller so under read 0.8 at 30mph or 1.6 at 60mph which I think is acceptable

Need some centres so any links to ones you've bought appreciated?

Whaddya think?

Edited by X-Man
Link to comment
Share on other sites

Fitted. Will probably need a 15mm spacer at the back and needs time to settle but well chuffed!

20140724_210838_zpsqk329blm.jpg

20140724_210902_zpsjrofuhle.jpg

Car is filthy and pics are off phone in bad light but it gives a good idea!

Arches cleaned and calipers painted next!

I suppose it would be a good time to mention that this little lot cost me £300 with the tyres [smug]

Links to spacers appreciated. Cheers!

Edited by X-Man
Link to comment
Share on other sites

No they are a bit like Tiger Claws baby brother!

I know what you mean, I find TCs a bit too 'in your face' but these are 18s so a bit more subtle

The spokes on these are flush to the wheel whereas the TCs bow slightly near the edge

They have a really nice dish on them. I'll try and get a better close up when it's clean!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...