cf_corp Posted February 8, 2013 Report Share Posted February 8, 2013 (edited) Hi folks, ive installed a set of leccy leather memory seats in an 04 320cd. I got the power function working fine, just with regards to the k bus connection for the drivers side memory function. Can i just tap into any of the yellow/red/white cables in the k bus comb connector in the fuse box? as in the connector in the picture here, post #31? Thanks guys http://forum.e46fana...ight=bus&page=2 Edited February 8, 2013 by cf_corp Link to comment Share on other sites More sharing options...
starkie7 Posted February 9, 2013 Report Share Posted February 9, 2013 That's the one. Actually easier to get to than getting the power cables in the fusebox too. Link to comment Share on other sites More sharing options...
B0B Posted February 9, 2013 Report Share Posted February 9, 2013 That's the one. Actually easier to get to than getting the power cables in the fusebox too. +1 Link to comment Share on other sites More sharing options...
cf_corp Posted February 9, 2013 Author Report Share Posted February 9, 2013 thanks for the quick replies guys, i was doing this job for a guy but he told me wired the k line wire to a permanent +12v for some reason so i told him to disconnect it, so i will be splicing into the k line by the looks of it. Link to comment Share on other sites More sharing options...
