Jump to content
Melv1958

Damo's Coupe 330ci update - Splitters added

Recommended Posts

No spacers mate, fronts are 8.5j Et 40 and rears are 9.5j Et40, fronts 225/35/19 and rear 235/35/19 and no scraping at all, very close to arch but no scrape, a 245 will scrape for sure

Link to comment
Share on other sites

Thanks for the info bud, I have 245 on my rear at the minute but have some 235 nankangs to go on and then swapping out my 5mm spacer for a 12mm spacer. Then swapping out my 235 falkens on the fronts for some 225 nankangs/khumo's with a 5mm spacer. If your happy with your khumo's I might get those for the fronts over nankangs.

Link to comment
Share on other sites

I had nankangs originally on my last Bmw and I got rid straight away, tyre noise was bad, then i had falken 452s, and this time I have khumos and I'd Deffo reccomend them mate

Link to comment
Share on other sites

Just a few pictures guys and also fitted a small front number plate, each to their own, I really like it.

Splitters to go on soon

And Finally !!!!! Got the part number to revert back to single din, so went to the dealers and purchased a new sunglasses case and new ashtray part.

Hope you all like.

image_zpsi4bcrjcj.jpg

image_zps5drhcskc.jpg

image_zpslcm6c5zg.jpg

image_zpszblximuv.jpg

image_zpsmeqz9shj.jpg

image_zpsdwohihm2.jpg

image_zpsqxqfxbfc.jpg

image_zpso4gvdrrl.jpg

Link to comment
Share on other sites

Cheers I think I'll be getting that next. Tidys up the interior a bit :) was that off cotsworld BMW?

They are a great car for little money! And I think most people would look at them and expect them to cost more, especially a facelift

Link to comment
Share on other sites

Bob I'm not sure if can and coupe are same but I have one mint seat back other has a mark on it so going in bin, you cm can have it if it's any use,

Car looks nice damo a lot better than Vaux even Spartacus from vxr online now has a bmw

That's a really kind offer mate and it's appreciated but according to realoem the part numbers are different and I think they are a slightly different shape because the seat belt mounting points are on the seat in a vert.

Link to comment
Share on other sites

Update guys

Took a trip down to Darren's house aka "Dsport" and he fitted me my angel lights and Hid lights and also dechromed my inner headlight indicator surround and also dechromed the front rings.

He also fitted my brothers m3 angel lights.

Can't reccomend him enough to fit the angel lights, knew his stuff!

image_zps5vjy1nni.jpg

image_zpsrvxvzbql.jpg

image_zps6vlrkscu.jpg

image_zps7i8tylps.jpg

image_zpswofhlkcf.jpg

image_zpsp54l5z0t.jpg

image_zpsq0xhwfw9.jpg

image_zpsnxpiqet6.jpg

image_zpstiess4gf.jpg

image_zpsbsare2bo.jpg

image_zpsd6lc38pz.jpg

image_zpsyvhgpfw9.jpg

Brothers M3

image_zpsx8facqyz.jpg

image_zpsbwqilmyp.jpg

image_zpsckl4u6dv.jpg

image_zpsed3sbnym.jpg

image_zpsvqliheig.jpg

Edited by Damo88
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...


×
×
  • Create New...