__D6 Posted April 24, 2017 Report Share Posted April 24, 2017 Hello folks, About to remove my faulty CCV system and replace with an oil catch can and PCV valve. All of the threads I can find are american and use this FRAM part : http://www.oreillyauto.com/site/c/detail/MGD0/PCV345.oap?year=2000&make=Dodge&model=Intrepid&vi=1361898&ck=Search_02180_1361898_-1&pt=02180&ppt=C0023#itemDetailTab_ I've tried getting hold of this in the UK and the cheapest I can find it is £46 and the local Chrysler dealer was zero help. So, what PCV valve will be suitable for this? I've seen mention of a 1.8 turbo Volkswagon one but it seems a bit plasticy and only mentioned in 1 thread. Cheers, Matt Link to comment Share on other sites More sharing options...
Ross330i Posted April 24, 2017 Report Share Posted April 24, 2017 I got my pcv valve from a mx5 mk1 on ebay with the pipes for 4 quid. The pipes fit my catch can ebay 22 quid, aslong as its a pvc valve I dont think it matters which model or make aslong as it works, air one way no return. Link to comment Share on other sites More sharing options...
__D6 Posted April 24, 2017 Author Report Share Posted April 24, 2017 I have a garage full of mk1 MX5 bits and one on the drive lol! I guess we're going down that route then. Thanks Ross! Link to comment Share on other sites More sharing options...
Ross330i Posted April 24, 2017 Report Share Posted April 24, 2017 Fair play, we'll both have mx5 bits in a bm. Oh purists would cry. Its my 1st bm, a 330i. I run a mk1 mr2 a 89. Got two mk1s a mk2 2.0 gt. A civic ej9 too. Have a good day Link to comment Share on other sites More sharing options...
