rickyh147 Posted April 29, 2015 Report Share Posted April 29, 2015 (edited) My cables run from the unit through the glovebox and around under the side trim below the door, then behind the back passenger side trim. For the radio aerial I ran it around again and under the back seats and drilled a small hole through the ski hatch bit to save taking the rear side trims off again (damaged a few clips the first time!). Took ages to route the sat nav wire through the first time around, but only 15 mins when doing the radio aerial a week or so later once we knew what we were doing! Edited April 29, 2015 by rickyh147 Link to comment Share on other sites More sharing options...