Blazingmo2312 Posted May 20, 2015 Report Share Posted May 20, 2015 Hi Well when set to auto my headlights, seem to stay on most of the time, my wipers when put on auto, don't just wipe once then wipe when the rain comes, they go into intermittent mode. Sometimes both work ok, but then they don't, any ideas please, really annoying, really want to fix them Quote Link to comment Share on other sites More sharing options...
bungers Posted May 20, 2015 Report Share Posted May 20, 2015 Worth re-initialising the rain/light sensor, you can do this with INPA or you might get away with disconnecting the battery & connecting the leads together for a while to reset all the sensors. Quote Link to comment Share on other sites More sharing options...
mikesmith2 Posted May 21, 2015 Report Share Posted May 21, 2015 Is the windscreen a BMW one? Most none BMW windscreens cause problems with the sensors Quote Link to comment Share on other sites More sharing options...
chocka Posted May 21, 2015 Report Share Posted May 21, 2015 my screen is non BMW and works fine Quote Link to comment Share on other sites More sharing options...
TriggerFish Posted May 21, 2015 Report Share Posted May 21, 2015 My auto lights are very sensitive. They come on (I think) at speeds, in the dark, in bright sunlight. You can alter the sensitivity with NCS, but I've not tried this. Quote Link to comment Share on other sites More sharing options...
Blazingmo2312 Posted May 21, 2015 Author Report Share Posted May 21, 2015 Il reset battery tonight and let you guys know, how I get on Quote Link to comment Share on other sites More sharing options...
mikesmith2 Posted May 22, 2015 Report Share Posted May 22, 2015 My non BMW screen causes problems, the auto lights work but the auto wipers don't. I have reinitialised the sensor and tried another one both to no avail. Quote Link to comment Share on other sites More sharing options...
Blazingmo2312 Posted May 22, 2015 Author Report Share Posted May 22, 2015 I reset the battery, but is still playing up, my car has an original screen. Any other ideas I could try, do I need to replace the module on the screen? Quote Link to comment Share on other sites More sharing options...
mikesmith2 Posted May 22, 2015 Report Share Posted May 22, 2015 Get yourself inpa and lead or PA Soft and lead. This will allow you to read any faults and reinitialise the sensor Quote Link to comment Share on other sites More sharing options...