Todd1983 Posted April 1, 2015 Report Share Posted April 1, 2015 (edited) If position the filter further forward and lower then would massively reduce heat soak as wouldn't be directly over exhaust manifold and turbo.....hmmm gonna look when home lol Edited April 1, 2015 by Todd1983 chunky899 1 Link to comment Share on other sites More sharing options...
The_Judge_ Posted April 1, 2015 Report Share Posted April 1, 2015 so just minor damage on that pipe then (!) Link to comment Share on other sites More sharing options...
Todd1983 Posted April 2, 2015 Report Share Posted April 2, 2015 Do you think the Air box is heat resistant? Or that all major tuned cars run closed air boxes? Yes there will be more heat soak, but the extra air flow will out weigh this combined with fmic to bring IAT down. I'll even post a picture when I'm in my yard of one of the engines that I look after that is built by probably the best industrial Diesel engine manufacturer going that is supplied with an open air filter, and that's on a static engine where engine bay temps are much higher than on a car. It's the same principle as running an induction kit Here's that picture I promised, I'm sure cummins know what they're doing fitting an open filter to their qsl9's (9ltr straight 6) chunky899 1 Link to comment Share on other sites More sharing options...
Tewkes Posted April 2, 2015 Report Share Posted April 2, 2015 I'm not saying open air is bad? I'm just stating that over the turbo and exhaust etc at the back of the engine it will absorb some more heat, than usual. That picture looks like it's on the front of a block? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
Todd1983 Posted April 2, 2015 Report Share Posted April 2, 2015 It is to the left of the manifold towards rear of the engine. But as said, engine bay temps are still higher as a static engine Vas 1 Link to comment Share on other sites More sharing options...
TriggerFish Posted April 2, 2015 Report Share Posted April 2, 2015 as a static engine It's really hard to work on engines when they keep running around, I find! My concern with the open air filter would be: how well secured is it? I know they're a tight fit, but some cable ties or something to keep it in place would put my mind at rest, personally. The_Judge_ and Daud 2 Link to comment Share on other sites More sharing options...
Todd1983 Posted April 2, 2015 Report Share Posted April 2, 2015 Lol, ment they don't move along getting airflow like a car. It's an engine in a box. When I do my induction kit, I will make a heatshield to sit beneath the filter, and brace it so can't move. Mr Xen 1 Link to comment Share on other sites More sharing options...
chunky899 Posted April 11, 2015 Author Report Share Posted April 11, 2015 Oh Joy..... Gearbox has no drive in any gear.. not good. Had this code come up but no light on the dash now. If anyone has any idea what it might be that'd be much appreciated ....Phone..... Link to comment Share on other sites More sharing options...
The_Judge_ Posted April 11, 2015 Report Share Posted April 11, 2015 Doesn't look good! Link to comment Share on other sites More sharing options...
Todd1983 Posted April 11, 2015 Report Share Posted April 11, 2015 I had that scanner, found it useless so through it in the bin. Now use torque pro through a Bluetooth adapter And it's great. Hopefully nothing too serious dude Link to comment Share on other sites More sharing options...
Todd1983 Posted April 11, 2015 Report Share Posted April 11, 2015 Just had a thought......your problem is heatsoak Link to comment Share on other sites More sharing options...
chunky899 Posted April 12, 2015 Author Report Share Posted April 12, 2015 Just had a thought......your problem is heatsoak Oil degraded? It's possible the oil is like water :/ haha ....Phone..... Link to comment Share on other sites More sharing options...
chunky899 Posted April 12, 2015 Author Report Share Posted April 12, 2015 (edited) Right, after spending a lot of time swearing at the car, then researching what could be the issue. i have come to think that its the two pressure solenoids n the valve body. but i need to know if there's a UK place i can get them from... I can only see US one's :/ I really only need 2 of the 5 but if i have to get the lot it's fine. http://www.ebay.co.uk/itm/5L40E-Transmission-Solenoid-Kit-GM-BMW-Shift-TCC-EPC-NEW-1999-2003-99166-/190835980359?hash=item2c6eb5f847 @Todd1983 any ideas? lol Edited April 12, 2015 by chunky899 Link to comment Share on other sites More sharing options...
chunky899 Posted April 13, 2015 Author Report Share Posted April 13, 2015 (edited) Well, I've organised a deal with the American seller, he agreed to get them to me ASAP But for now I'm using my friends Clubsport although it's in need of a damn good clean haha Wink wink @Naj ....Phone..... Edited April 13, 2015 by chunky899 Naj 1 Link to comment Share on other sites More sharing options...
Naj Posted April 13, 2015 Report Share Posted April 13, 2015 (edited) Haha! Friday! We got bits and bobs to do on my car and my cars due a clean as well Edit: I'm glad you got the bits for your car... Big bucks? Edited April 13, 2015 by Naj Link to comment Share on other sites More sharing options...
chunky899 Posted April 13, 2015 Author Report Share Posted April 13, 2015 Haha! Friday! We got bits and bobs to do on my car and my cars due a clean as well [emoji14]unk: [emoji14]unk: Edit: I'm glad you got the bits for your car... Big bucks? Issue. Fridays my Bday I'll drop the pulsar off for a Bday clean up and claybar ....Phone..... Link to comment Share on other sites More sharing options...
chunky899 Posted May 5, 2015 Author Report Share Posted May 5, 2015 (edited) So... The car went into specialist today, getting it back tomorrow a new gearbox and torque converter, and a big lump of monies later....it'll be healthy again. Now don't all think it's failed because of the turbo because I'm sure that's not the issue. The box was on 160,000 miles and a hard life. The gearboxes are only good for 100,000 from what I've seen so It's been waiting to fail. I guess me driving like a c**k since I got it has hasn't helped. ....Phone..... Edited May 5, 2015 by chunky899 The_Judge_, Todd1983 and Naj 3 Link to comment Share on other sites More sharing options...
The_Judge_ Posted May 5, 2015 Report Share Posted May 5, 2015 Hmm, so not long before my gearbox explodes lozevans 1 Link to comment Share on other sites More sharing options...
chunky899 Posted May 5, 2015 Author Report Share Posted May 5, 2015 Hmm, so not long before my gearbox explodes I can recommend a good company for you lol ....Phone..... The_Judge_ 1 Link to comment Share on other sites More sharing options...
Todd1983 Posted May 5, 2015 Report Share Posted May 5, 2015 Looking forward to finding the limits on the manual box lol Link to comment Share on other sites More sharing options...
chunky899 Posted May 5, 2015 Author Report Share Posted May 5, 2015 Looking forward to finding the limits on the manual box lol Endless apparently haha ....Phone..... Link to comment Share on other sites More sharing options...
Todd1983 Posted May 5, 2015 Report Share Posted May 5, 2015 Lol we will see chunky899 1 Link to comment Share on other sites More sharing options...
chunky899 Posted May 7, 2015 Author Report Share Posted May 7, 2015 So I'm currently very happy with the car now it's all back working again. . . . So I've been nice and treated it Csl style front spats, and new Android Erisin headunit. (I'd upload some photo's but Tapatalk being w**k....maybe later. ....Phone..... Link to comment Share on other sites More sharing options...
Naj Posted May 9, 2015 Report Share Posted May 9, 2015 Because michael has a crap phone. Via Mobile Telecommunications Device Todd1983, The_Judge_, chunky899 and 2 others 5 Link to comment Share on other sites More sharing options...
Ruben330ci Posted June 5, 2015 Report Share Posted June 5, 2015 Welcome Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
